Product Application
Concentrated tank have the function of
automatic temperature control, heat preservation and mixing and the
advantages of Quick heat transfer, to adapt to the temperature
difference big, convenient cleaning etc. It is widely in food (dairy)
products, pharmaceutical, cosmetic, beverage, oil, chemical industry,
paint and other industries as a buffer between, reservoir, mixing,
mixing equipment (in the material without heating can mix evenly, that
this equipment is the most economic and practical), heating, deploy
mixed or sterilization process . Particularly suitable for without steam
heat source unit and scientific research institutions small and pilot
use. Sanitary stainless steel Materials, human nature structure design ,
strong maneuverability, and can be fully enclosed structure or
insulating structure
according to the process requires.
Structure
Agitation
tank is composed of mixing tank body, mixing tank cover, agitator,
bearing, gear, shaft sealing device etc, meanwhile, can be configured
heating or cooling device according to process requirements.Mixing tank
body and mixing tank cover can configure Process pipe hole, such as the
feeding and discharging, observation, temperature, pressure, steam
fractionation, safety vent etc. Owing to different production process,
the agitator configurable paddle type, anchor type, frame type, spiral,
and other forms.Any other requirements can contact the supplier.
Technical performance
1, heating mode: steam or electric heating (for heating and sterilization)
2, temperature control: Thermocouple and temperature controller (temperature measurements and adjustment)
3, tank body: Inner surface mirror polished, roughness Ra≤0.4um.
4, cover: Opening activity manhole cover, easy to clean, both inside and outside mirror polished surface.
5,
inner tank bottom structure: after spinning processing make tank bottom
become R Angle, and no dead Angle after welding and polishing of tank,
so that no dead corner of sanitation.
6, jacketed forms: full jacket, coil pipe jacket, miller board, etc.
7, thermal insulation material: PU foam (polyurethane foam), environmental protection, good heat preservation performance.
8,
Shell Surface Treatment: Mirror polished or 2B Primary inferior smooth
inferior smooth processing or 2B Frosted surface inferior smooth
processing.
9, stirring device: top center stirring, reducer output
shaft and impeller shaft is loop connection, easy disassembling and
cleaning, without external bolt fall hazard.
10, Emulsification
device: high-shear dispersing emulsifier. After dispersing, shearing,
emulsification, homogenization, finally, get a stable high-quality
products.
11, supporting feet form: round Tubular or suspension Lug type.
12, Welding are used flanging process arc transition, smooth, easy to clean, no dead ends, and beautiful appearance.
PRODUCTS SHOW
