This series blending tank / preparation tank /
mixing tank, completely closed vertical structure, is clean and hygienic
equipment, with heating, cooling, insulation and agitation function. It
is designed for food (dairy) products, beverages, pharmaceuticals,
biotechnology, wine, spices, flavors and fragrances, cosmetic industry
etc. Tanks have jacket which can put into steam or cooling water
respectively for heating or cooling, so that more than two kinds of
material (such as powder or additives + solution, etc.) by means of a
stirrer sufficient mixing, stirring at the optimum temperature
Agitation tank is composed of mixing
tank body, mixing tank cover, agitator, bearing, gear, shaft sealing
device etc, meanwhile, can be configured heating or cooling device
according to process requirements.Mixing tank body and mixing tank cover
can configure Process pipe hole, such as the feeding and discharging,
observation, temperature, pressure, steam fractionation, safety vent
etc. Owing to different production process, the agitator configurable
paddle type, anchor type, frame type, spiral, and other forms.Any other
requirements can contact the supplier.
1, heating mode: steam or electric heating (for heating and sterilization)
2, temperature control: Thermocouple and temperature controller (temperature measurements and adjustment)
3, tank body: Inner surface mirror polished, roughness Ra≤0.4um.
4, cover: Opening activity manhole cover, easy to clean, both inside and outside mirror polished surface.
5, inner tank bottom structure: after spinning processing make tank
bottom become R Angle, and no dead Angle after welding and polishing of
tank, so that no dead corner of sanitation.
6, jacketed forms: full jacket, coil pipe jacket, miller board, etc.
7, thermal insulation material: PU foam (polyurethane foam), environmental protection, good heat preservation performance.
8, Shell Surface Treatment: Mirror polished or 2B Primary inferior
smooth inferior smooth processing or 2B Frosted surface inferior smooth
9, stirring device: top center stirring, reducer output
shaft and impeller shaft is loop connection, easy disassembling and
cleaning, without external bolt fall hazard.
device: high-shear dispersing emulsifier. After dispersing, shearing,
emulsification, homogenization, finally, get a stable high-quality
11, supporting feet form: round Tubular or suspension Lug type.
12, Welding are used flanging process arc transition, smooth, easy to clean, no dead ends, and beautiful appearance.